IONSPA I-SPA Shower Micro-pore Filter Shower Head | Made in Korea × 3-Layer Composite Filtration × Temperature-Sensing Color Change × 4x Pressure Boost & Water Saving | 5-in-1: Filtration, Water Saving, Moisturizing, Deep Cleansing, and Negative Ions

IONSPA I-SPA SHOWER Microporous Filter Shower Head—a high-value spa shower head from Korea that offers five major functions at once and features a "visible water temperature indicator." Genuine product.
The I-SPA SHOWER by IONSPA Korea uses a 3-layer composite filter to trap rust and impurities in the water, spraying a soft, cyclonic stream through ultra-fine nozzles. These tiny water molecules penetrate pores more effectively to wash away oil and dirt, leaving skin feeling moisturized for up to 12 hours after showering※. The microporous design also concentrates the water flow, increasing perceived water pressure by up to 4 times while reducing water consumption and saving on water heating costs. Most notably, the pre-filter changes color based on water temperature, allowing you to see at a glance whether the water is warm or hot, providing extra peace of mind for households with children or the elderly. Filtration, water saving, hydration, deep cleansing, and negative ions—one shower head that meets all your shower needs.

Microporous Filter Shower Head | Made in Korea | 3-Layer Composite Filter | Temperature-Sensitive Color-Changing Pre-Filter | Soft Cyclonic Water Flow | 4x Perceived Water Pressure Increase | Water & Fuel Saving | 12-Hour Hydration※ | Negative Ions | Genuine Product

※Based on manufacturer test data; actual experience may vary depending on water quality, environment, and personal conditions.

Are you troubled by these issues?

• Skin feels dry and tight immediately after showering, as if skincare products aren't working.
• Scalp feels oily and not properly cleaned; it feels like dirt remains deep in the pores.
• Weak water pressure at home makes showering feel like being dripped on, and washing hair is especially time-consuming.
• Afraid of sudden water temperature fluctuations while showering children or the elderly, making it hard to detect burns in time.
• Want to buy a water filtration shower head, but high-end models are expensive and the subsequent filter replacements seem never-ending.

One shower head, five major functions

Tap water often carries rust particles and impurities from pipes to your bathroom. Standard shower heads simply "pour" water onto the skin, unable to reach deep into pores. The I-SPA SHOWER works differently: the 3-layer composite filter traps impurities, while the ultra-fine nozzles create a cyclonic flow. These smaller, more penetrating water molecules enter pores to remove oil and dirt while retaining moisture in the skin. The concentrated flow increases pressure while using less water. Enjoy filtration, water savings, hydration, deep cleansing, and negative ions every day.

Three Key Features

1. Microporous Cyclonic Flow for 12-Hour Hydration

The I-SPA uses ultra-fine nozzles that pressurize the water into a cyclonic stream. The soft, tiny water molecules penetrate deep into pores, washing away excess oil and dirt while allowing moisture to remain in the skin. Manufacturer tests confirm a moisturizing effect lasting up to 12 hours※. It feels like a gentle hot spring bath, with no stinging sensation on the face or scalp, and leaves hair feeling airier and fresher after drying.

2. 3-Layer Composite Filtration for Enhanced Cleanliness

The built-in 3-layer composite filter traps rust, sand, and impurities, ensuring every drop touching your scalp and skin is cleaner. The filter is removable and easy to clean, keeping long-term maintenance costs low.

3. Temperature-Sensitive Color Change—Rare Temperature Monitoring

The pre-filter is made from a temperature-sensitive material that changes color based on heat. Glance at the shower head after turning it on to see if the water is warm or hot, eliminating the need to test with your hand or fear sudden temperature changes. This is an exceptionally thoughtful feature for those caring for infants or the elderly.

User-Friendly Design

• Up to 4x Water Pressure Increase: Concentrated flow through micro-nozzles enhances rinsing power even in homes with weak water pressure.
• Water & Fuel Savings: Reduced water output saves both water and the energy used by your water heater.
• Negative Ion Soothing: The cyclonic water flow releases negative ions, making your shower time more relaxing.
• Standard Threaded Connection: Fits standard home shower hoses; installs in seconds without tools.
• Removable Structure: The filter and spray plate can be removed for cleaning to maintain hygiene and flow.

Product Specifications

※Based on manufacturer test data; actual performance depends on water quality, water pressure, and usage environment. Dimensions, weight, and filter replacement cycles are subject to packaging and manual specifications.

Contents: I-SPA SHOWER Microporous Filter Shower Head × 1, Instruction Manual × 1

How to Use

Usage Tips

• Before shampooing, thoroughly wet the scalp with the shower head for about 30 seconds; the fine flow loosens oils effectively and reduces shampoo usage.
• When rinsing out shampoo, hold the shower head close to the scalp, using the cyclonic flow to prevent residue-related stickiness.
• Gently pat skin dry after showering instead of rubbing hard to better retain skin hydration.
• The color change is only a guide; always test water temperature with your hand before directing it toward infants or the elderly.
• If flow weakens, it is likely due to limescale in the micro-nozzles; follow Step 6 to restore.
• In areas with hard water or high iron content, clean and replace filters more frequently.

Precautions

• This product is for showering and aims to improve water quality and rinsing experience. It is not a medical device and cannot replace medical advice.
• Consult a doctor before use if you have skin wounds, inflammation, or skin conditions.
• If you feel any discomfort upon initial use, stop immediately and rinse with clean water.
• Output temperature is determined by your home water system; temperature change is only a guide.
• Do not connect to high-pressure water sources outside of household standards to avoid damage.
• Do not soak the shower head in strong cleaners or bleach, as this may damage the temperature-sensitive material and filter.
• The filter is a consumable item; replace it regularly based on water quality.
• Keep out of reach of children to avoid ingestion of small parts.

Who is this for?

• Those whose skin feels dry and tight after showering and want better hydration.
• Those with oily scalps who want to remove pore dirt more thoroughly.
• Families with weak water pressure who want an easy way to increase pressure while saving water and fuel.
• Parents and caregivers of infants or the elderly who need a quick, visible water temperature guide.
• Users looking for a Korean filter shower head with excellent value for money.
• Anyone looking for a practical, quality-of-life-improving gift for family or friends moving into a new home.

FAQ

Q1: What is the difference between the I-SPA SHOWER and the flagship IONSPA BATH1000?
A: The I-SPA is a high-value model from IONSPA, focusing on the 5-in-1 benefits of filtration, water saving, hydration, deep cleaning, and negative ions, featuring a unique color-changing temperature indicator. The flagship model includes a magnetic filtration structure and additional filtration layers. For budget-conscious users new to microporous spa showers, the I-SPA is the ideal choice.

Q2: How was the "12-hour hydration" determined?
A: This is based on manufacturer test data showing how long skin moisture levels remained elevated after showering with the I-SPA. Actual experience may vary based on skin type, water quality, season, and indoor humidity. ※Results vary by individual.

Q3: How does the temperature-sensitive color change work? Is it reliable?
A: The pre-filter uses temperature-sensitive material that changes color as temperature increases. It acts as an intuitive guide, not a precise thermometer. Always use your hand to check the temperature when showering infants or the elderly.

Q4: Can I install it on my home's existing shower hose?
A: Yes. The I-SPA uses a standard threaded connection that fits most household shower hoses. If your hose has a special specification, use a commercially available adapter.

Q5: Does water pressure really increase by 4 times?
A: The micro-nozzles concentrate the flow, leading to a perceived pressure increase of up to 4x according to manufacturer tests. Actual increases depend on your home's baseline pressure.

Q6: Will I really save water? Will it still rinse clean?
A: While the nozzles are small and reduce total flow, the concentrated stream increases rinsing efficiency. You use less water and heat less water, saving on both water bills and fuel costs.

Q7: How often should the filter be cleaned or replaced?
A: Cleaning every 1–3 months is recommended. Replace when the filter is visibly discolored or flow noticeably weakens, depending on your local water quality.

Q8: Can people with sensitive skin or infants use this?
A: This product uses physical filtration and microporous nozzles without chemical additives, making it safe for general household use. If you have specific skin conditions, consult a doctor first. Always have an adult adjust the temperature for infants.

Filtration × Water Saving × Hydration × Deep Cleansing × Negative Ions, plus a visible water temperature guide—the Korean IONSPA I-SPA SHOWER Microporous Filter Shower Head turns your daily shower into a gentle home spa experience at an accessible price.